| |
|
FGR006/EX |
Finger Biometric Reader
Key Features:
- 1:1 Verification and 1: N Identification
- Identification Method: by Auto Touch Sensor (optional) : FGR006A / EXA
- 125KHz Proximity and Fingerprint Recognition
- 1,000/2,000/4,000 Fingerprint Users
- Various Operating Mode
- ID only Function for Fingerprint Unregistrerable Person
- Network Communication via RS232 / RS422 / RS485 (Max.255ch), TCP/IP (External Converter required)
- Upload/Download Fingerprint Templates using PDA or Notebook (Optional, RS232C Stereo Jack required)
- Fingerprint Register / Reader Mode using Master Card
- Off-line Add / Delete Function using Master Card
- 26bit Wiegand (default) and ABA Track II (optional) Output Format
- 1ea of External Reader Port: (FGR006EX) 26 / 34bit Wiegand, 4 / 8bit Burst for PIN and ABA Track II
- High Protection from Scratch and ESD (Electro Static Discharge)
- High Quality Optical Sensor
- Tamper Switch
- Options: Supervisory Signal RS232C Stereo Jack
- Compatible Software: STARWATCH DUAL PRO I / II, iTDC PRO I / II FINGERPRINT ENROLLMENT PRO 2006
- Compatible Controller: iCON100, iTDC, Third Party Controller, Standalone Controller
|
| Comparison Table |
| FGR006 |
Built-in 125KHz (4¡±) Proximity Reader |
| RF only / Fingerprint only / RF+ Fingerprint |
| FGR006EX |
Built-in 1ea of External Reader Port |
| FGR006A |
FGR006 including Auto Touch Sensor for Identification |
| FGR006EXA |
FGR006EX including Auto Touch Sensor for Identification |
|
| Specifications |
|
Model |
FGR006 |
FGR006EX |
| CPU |
32bit ARM9 and Dual 8bit Microprocessor |
| Memory Module |
Fingerprint Module |
Program Memory |
128KByte Flash ROM |
| Data Memory |
128KByte / 256KByte / 512KByte Flash Memory |
| Controller |
Program Memory |
128KByte Flash ROM |
| Data Memory |
256KByte Flash Memory |
| Fingerprint User |
1,000 / 2,000 / 4,000 Fingerprint Users |
| Fingerprint Templates Size |
800Bytes for 2 Fingerprint Templates |
| Read Range |
Passive Type |
IDK50 / IMC125 : Up to 2 inch (5cm)
IDC80 / IDC170 : Up to 4 inch (10cm) |
Depending on External Reader |
| Active Type |
IDA150 / IDA200 compatible |
| Reading Time (Card) |
30ms. |
| Verification Time |
Less than 1sec. |
| Identification Time |
Less than 2sec. |
| Power / Current |
DC 12V / Max. 350mA |
| External Reader Port |
N/A |
1ea: 26 / 34bit Wiegand,
4 / 8bit Burst for PIN,
ABA Track II |
| Communication |
RS232 / RS422 / RS485 (Max.255ch), TCP/IP (External LAN Converter required) |
| Baud Rate |
9,600bps (default) / 4,800bps, 19,200bps and 38,400bps (selectable) |
| Input Port |
2ea (External LED Control, External Buzzer Control) |
| Output Port |
2ea (Error-Output , OK-Output (Open Collector Output)) |
| Output Format |
26bit Wiegand (default)
ABA Track II (optional) |
| LED Indicator / Beeper |
3 Array LED Indicators (Red and Green) / Piezo Buzzer |
| Operating Temperature |
Fingerprint Module / LCD |
-15 to +40C (+5 to +104F) |
| Controller / RF Reader |
-35 to + 65C (-31 to +149F) |
| Operating Humidity |
10% to 90% relative humidity non-condensing |
| Color / Material |
Pearl Dark Gray and Light Gray / Polycarbonate |
| Dimension (W x H x T) / Weight |
2.6" x 5.1" x 2.0" (66mm x 129mm x 52mm) / 259.5g (0.57lbs) |
| Certification |
FCC, CE, MIC, RoHS |
|
| Finger Module Specifications |
| Resolution |
500dpi
|
Capture Image Size
|
356 x 292 pixels
|
Extraction Image Size
|
248 x 292 pixels
|
Sensing Area
|
12.7 x 14.9 mm
|
Scanner
|
High Quality Optical Sensor
|
FAR (False Acceptance Ratio)
|
0.001%
|
FRR (False Reject Ratio)
|
0.1%
|
ESD (Electro Static Discharge)
|
15KV
|
Verification Time
|
Less than 1sec.
|
| Identification Time |
Less than 2sec.
|
|
|
 Download FactSheet |
|
